NEW PRODUCT (with original packaging) -- SPDIF/Toslink Digital Optica Audio 1x3 Splitter
FEATURES
●One way of optical fiber signal input splitter to three sets of SPDIF/ToLink signal receiving device
●Audio format support: LPCM2.0/DTS/Do/by-AC3
●Support signal retiming
●Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m
●Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine
●No loss of quality
●Installs in minutes
●Need DC5V/500mA power supply
The accessories with the machines lists:
1. 5V Power Adaptor
2. Operation Manual
Physical Connection Showing Picture:
1. SPDIF/TosLink output port 1,2
2. SPDIF/TosLink output potr 3
3. SPDIF/TosLink input port
4. DC/5V Power Adapter Interface
Operating and Connecting
1. To use the optical fiber cable to connect the optical fiber signal source(such as blue-ray, the computer and so on) with the splitter input.
2. To le the splitter output port connected to the optical fiber signal receiver(such as amplifier, home theater and so on) by using the optical cable.
3. Connect 5V power supply to the splitters DC input port.
SPECIFICATIONS:
Support audio format................................LPCM2.0/Dolby-AC3
Peak wavelength...........................................650nm
Max baud rate................................................16Mbps
Output cable distance.........≤40m (Use the optical fiber cable loss less the 0.2Db/m)
Max working current..........................................................100mA
Power adapter format...........lnput:AC (50Hz, 60Hz) 100V-240V; Output: DC5V/500mA
Operating Temperature range........................................5 to 90%RH(No Condensation)
Dimension( L X W X H).......................................................54X54X23.5(mm)
Weight........................................................................................35g
Notes:
Please use the machine as the insted to keep the long use lifetime of the machine.
1.The machine should be placed at the sport far from the Damp, High-Temperature,Dusty, Erosive, and oxidative environment.
2. All parts will be free from the strong shake, hit, fall.
3. Touching the power adaptor with the wet hands is prohblited.
4. Please hold the power adapter head and do not pull the power cord when cut off from the socket.
5. Please turn the power off when the machine is not used for long time.
6. Please use the original factory power adapter.
Before power on, please check the connection line carefully, And make sure that all interfaces are normally connected, The common trouble shooting way shows below:
|
Serial NO |
Trouble Description |
Cause and Ways to deal with |
|
1 |
Non-Power-Connected |
1. Check if the power adapter head is truly and correctly inserted the power socket. 2. Check the power switch if it is in on status. |
|
2 |
No sound output |
1. Check if the power adapter head is truly and correctly inserted the power socket. 2. To check if the signal source is on and well connected. 3. Check the system connection quality. 4. Check if the line is all good quality. |
|
3 |
Sound interrupted |
1. To try again to connect the cable to be free from the unsuccessful connection. |
USD
EUR
GBP
CHF
