I. Introduction
1×8 SDI splitter distributes allows 1 SDI, HD-SDI or 3G-SDI video source to 8 SDI/HD-SDI/3G-SDI displays simultaneously. This product built-in automatic identification and compatible with SD-SDI, HD-SDI, 3G-SDI all format of SDI signal. It is the support 2.97Gbps bandwidth, and supports lossless transmission over long distances.
II. Features
- 1 SDI input signal split to 8 SDI sink devices.
- Supports SD-SDI(270Mb/s), HD-SDI(1.485Gb/s), 3G-SDI(2.97Gb/s) video format.
- Built-in cable equilibrium, clock recovery and drive.
- Supports resolutions up to 1920x1080@60Hz.
- Supports signal input and output distances of up to 300m for SD signals, 200m for HD signals and 100m for 3G signals.
- Supports 5-12V wide voltage input.
III. Package
- 1x8 SDI Splitter --------------------------------------------------- 1PCS
- 5V1A DC Power Supply adapter ----------------------------- 1PCS
- Operation Manual ------------------------------------------------ 1PCS
IV. Specifications
- Frequency Bandwidth 3Gbps
- SDI Splitter Input Ports 1 x BNC Female input port
- SDI Splitter Output Ports 8 x BNC Female output ports
- Power Supply DC 5V 1A
- ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
- Dimensions (mm) 90(W) X 229 (D) X 25 (H)
- Weight 476g
- Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
- Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
- Relative Humidity 20 ~ 90% RH (Non-condensing)
- Power Consumption (Max) 1.5W
V. Operation controls and Functions
Front Panel
- ON/OFF: Power on/off switch.
- POWER LED: This red LED illuminate when the device is connected with power supply.
- LOCK LED: This red LED illuminate when the SDI signal plug in.
Rear Panel
- SDI INPUT: This slot is where you connect the SDI source output from SDI Camera.
- SDI OUTPUT: These slots are where you connect the SDI displays or monitors with coaxial cable (RG6).
- DC 5V-12V: Plug the 5V or 12V DC power supply into the unit and connect the adapter to AC wall outlet.
VI. Application Example